• Ochrana kupujúceho
    ?
  • Odoslané do 1 pracovného dňa!
    ?
  • Najnižšia cena produktu
    ?
  • 14-dňová lehota na rozmyslenie
    ?

Ťažkotonážne zásuvkové výsuvy 250 kg 28 palcov = 700 mm

€ 62 bez DPH

Na sklade

Highlights:
BRASOM | SKU: BS1L-250-700 | EAN: 8721217100018
  • Cena je za set = 2 kusy
  • BEZ funkcie uzamknutia lock-in/-out; bez zaistenia.
  • Nosnosť do 250 kg na set pri rovnomernom rozložení
  • Vyššie uvedené platí pri montáži na stenu = odporúčané!
  • Minimálne 60 % podpora pri montáži na podlahu; prehýba sa a je citlivé na nečistoty!
  • 711 mm = montážna dĺžka 28 palcov
  • Vysúva sa o vlastnú dĺžku 711 mm, takže celková
  • vysunutá dĺžka je 1422 mm
  • šírka 76 mm – hrúbka 19,5 (±0,4) mm
  • 6 kg vlastná hmotnosť na set
  • Bez montážneho materiálu
  • Bez ľavej a pravej varianty
  • Pozinkovaná oceľ
  • Guľôčkové ložiská
  • Prečítajte si pokyny! Najdôležitejšie body:
    • Vo vnútri nepoužívajte hlavy skrutiek >2 mm
    • Prístup k upevňovacím otvorom cez otvor v strednom profile
    • Stojaci výsuv nepohybujte ↕; guľôčková klietka sa posunie!
    EAN: 8720618917331EAN: 8721217100025 Katalógové číslo: BS1L-250-700 Kategórie: , ,
    Popis

    Pravouhlá montáž zásuvkových výsuvov?

    Tento set 250 kg zásuvkových výsuvov možno namontovať pod uhlom 90° na podlahu alebo strop pomocou našich podlahových konzol BS1B-UNI-1. Tieto nie sú štandardne súčasťou zásuvkových výsuvov a musia sa do košíka pridať samostatne.

    The konzoly are designed so you can choose whether the lip protrudes underneath the zásuvka or along the side of the zásuvka. The montáž hardware is compact, so no threaded end protrudes on the outside. You can even attach two zásuvkové výsuvy to both sides of one konzola. This is ideal for multiple zásuvkas next to each other, for example in a obytné auto or úžitkové vozidlo. If you want multiple zásuvkas above each other, this can be done easily and quickly using these high konzoly BS1B-UNI-3.

    The podlahových konzol also make installation easier. Even professionals who could screw the zásuvkové výsuvy directly to the inner walls of a skrinka often choose our podlahových konzol for the following reason: adjusting zásuvkové výsuvy is, as explained under the ‚Mounting‘ heading, a difficult and precise job. The space between the skrinka and zásuvka may only deviate minimally from the specifications, and the montáž positions on both bočné steny must also be aligned with each other. This takes time and can be frustrating. You can avoid this by using our podlahových konzol. Mount the zásuvka and the podlahových konzol to the slides and then place the entire assembly into the skrinka. After sliding the zásuvka otvorené and zatvorené once, the slides are correctly aligned relative to each other and you only need to screw the konzoly to the base. Ideal!

    Montáž zásuvky alebo plošiny?

    You can screw or bolt the inner profile of the zásuvkové výsuvy directly to the side of a zásuvka. However, there are situations where our aluminium zásuvka konzoly BS1B-UNI-2 are useful. These angle profiles support the zásuvka, reducing the zaťaženie on the zásuvka wall so it can be made from thinner material. You could even omit the bočné steny and create a pull-out platform between the slides. Besides the extra possibilities, the konzoly also help with adjustment. You do not have to screw both slides to a zásuvka wall at exactly the same height. After montáž the konzoly, simply place the zásuvka on the konzoly and screw it in place. It could not be easier!

    Bez uzamykania?

    These heavy-duty zásuvkové výsuvy are NOT fitted with a uzamykanie function, so the zásuvka can move freely. This is often desirable for indoor use or in a workshop. For zásuvkas in vehicles, the same version WITH uzamykanie in both otvorené and zatvorené positions is often chosen.

    This uzamykanie function blocks movement in both zatvorené and otvorené positions. It is intended to prevent unwanted movement, for example in a úžitkové vozidlo while driving or for a pull-out kitchen unit in a obytné auto. The same length WITH lock is the BS2L-250-700.

    Akú hmotnosť unesie zásuvka s týmito výsuvmi?

    One set of these zásuvkové výsuvy can carry 250 kg. This applies both when retracted and vysunuté, provided the hmotnosť is evenly distributed along the length. If the hmotnosť is placed only deep inside the zásuvka, these slides can carry about 115% = 285 kg. The maximum point zaťaženie at the front of the zásuvka is about 70% = 175 kg. Do not forget to include the zásuvka’s own hmotnosť in your zaťaženie calculation. If necessary, place dividers in the zásuvka to prevent heavy contents from sliding forward. This benefits the zásuvkové výsuvy. You may also choose not to let the slides extend fully, but to stop the movement earlier. This reduces the lever arm of the protruding hmotnosť, allowing the slides to carry a higher zaťaženie compared with maximum extension.

    Horizontálne alebo vertikálne použitie zásuvkových výsuvov?

    The stated zaťaženies apply when the zásuvkové výsuvy are used in the standard vertical position, namontované against bočné steny. The slides can also be namontované flat/horizontally under the zásuvka, but this has negative effects on maximum zaťaženie and deflection. The maximum zaťaženie capacity decreases by 60%, and the front of the zásuvka will deflect several centimetres instead of a few millimetres when vysunuté, assuming the same hmotnosť.

    There is also another major disadvantage that is often overlooked. A flat-namontované zásuvkový výsuv is very sensitive to dirt. When the zásuvka otvorenés, the middle and largest profile is exposed like a long greased tray. The ball cage between the middle and largest profile is also exposed to things such as wind-blown sand. If it is only a little sand, these zásuvkové výsuvy with their large 8 mm balls will continue to work, but the movement will not become smoother.</vc_column_text]

    <"h4" class="heading-title">"Čo

    The zásuvkové výsuvy must be placed without tension between the zásuvka and the skrinka. Tension occurs when parts of the slides are pulled apart or pressed together in the thickness direction. To achieve smooth movement, the distance between the zásuvka and the bočné steny of the skrinka must remain within the range of 19.1 to 19.9 mm. If the gap deviates from this range, friction occurs and the slides will operate stiffly. Besides smooth movement, zásuvka stability is also important. The more space the slides have, the less stable the zásuvka becomes. In other words: the closer the gap is to 19.1 mm, the more stable the zásuvka. For example, a zásuvka with a gap of 19.8 mm will show more sideways movement when vysunuté than a zásuvka with a gap of 19.2 mm. In both cases, the zásuvka moves smoothly. We therefore advertise 19.1 mm because, considering both aspects, this is the ideal gap. The addition +0.8 / -0 indicates how much this size may deviate.

    Ďalšie informácie
    Hmotnosť 7 kg
    Rozmery 711 × 19,1 × 76 mm
    Montage

    Montáž zásuvkových výsuvov 250 kg

    Správne nastavenie zásuvkových výsuvov je nevyhnutné pre hladký a stabilný chod. Výsuvy nesmú byť voči sebe skrútené a medzi zásuvkou a skrinkou nesmú byť pod napätím.

    Napätie vzniká, keď sú výsuvy v smere hrúbky tlačené k sebe alebo od seba odťahované. Preto je dôležité, aby vôľa medzi zásuvkou a bočnými stenami skrinky zostala v predpísanom rozsahu 19,1 až 19,9 mm. Príliš malá alebo príliš veľká vôľa spôsobuje trenie a tuhý chod. V rámci povolenej tolerancie poskytuje malá vôľa najväčšiu stabilitu. Príklad: zásuvka s vôľou 19,8 mm sa môže vo vysunutej polohe mierne pohybovať do strán, zatiaľ čo zásuvka s vôľou 19,1 mm je stabilnejšia. V oboch prípadoch sa zásuvka hladko zasúva a vysúva.

    Pre správne zarovnanie sa odporúča jednu stranu úplne upevniť a druhú stranu (zásuvku alebo skrinku) počas montáže ponechať mierne nastaviteľnú. Tým je možné vyrovnať malé odchýlky v šírke. Nemontujte preto pevnú zásuvku do pevnej skrinky; neumožňuje to korekciu a spôsobuje problémy.

    Ak si chcete montáž uľahčiť, montážne konzoly sú efektívnym riešením. Tieto konzoly sa montujú na jednu alebo obe strany (stranu skrinky a/alebo stranu zásuvky) výsuvu a výrazne uľahčujú prácu. Aj profesionáli, ktorí by mohli zásuvkové výsuvy priamo priskrutkovať k vnútornej stene skrinky a/alebo zásuvky, často volia konzoly z nasledujúcich dôvodov: